Main Page

mini

Specifications

Available Engines

Kawasaki	19, 23 or 25 HP, (twin cylinder)
Honda	24 HP, twin cylinder

Common Features

Starter	12-volt solenoid shift, positive engagement
Ignition	Electronic
Charging System	12-volt, 15 amp
Fuel filter	Replaceable, automotive type
Air Cleaner	Heavy Duty off-road type for extended service interval
Cooling	Air-cooled, flywheel fan
Governor	Mechanical

Traction Drive System

Type	Dual hydrostatic. Individual pumps power two direct-drive wheel motors. System operates on 10W40 motor oil.
Pumps	Two variable displacement, axial-piston type. Each pump powers one drive wheel motor.
Pump Make / Model	Hydro-Gear / BDP10
Pump Drive	V-Belt from engine crankshaft
Final Drive	Direct-drive, high-torque wheel motors. One for each wheel. (White model CE 12)
Drive system filter	Replaceable, spin-on type. 40 micron
Ground Speed	Infinitely variable. 0-9 mph forward, 0-7 mph reverse
Steering	Twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake and turns are all controlled with hand operated controls.
Turning radius	True zero degree. Turns within its own length. Counter-rotating, independent drive wheels.

Brakes

Service	Hydrostatic dynamic braking
Parking	Automotive style drum brakes. When steering levers are placed in neutral position, integral parking brakes are automatically engaged.

Mower Drive

Single V-belt drive from from engine with electric clutch. Spring tension idler for extended belt life.

Tires Sizes

Front	13 x 5.00-6, rib tread
Rear	23 x 9.50-12 turf tread

Capacities

Fuel system	12 gallons
Hydraulic oil	2.0 gallons

Dimensions

Height	40.5"
Length	74"
Tire-Tire Width	44"
Overall width	53" (with 52" deck, discharge chute up) 45" (with 44" deck, discharge chute up)
Weight	995 lbs.

Safety Features

Operator presence system connected to deck and drive clutches. Stabilizer rollers at rear of tractor.

Seat

Molded vinyl seat with armrest. Fore and aft adjustment.

Construction features

Deck Lift

Foot operated deck height adjustment. Pin for setting height. Detent for transport position.

Controls

Hand operated choke/throttle, ignition switch, electric mower clutch. Integrated parking brakes.

Indicators

Hourmeter, engine warning light.

Cup Holders

Two cup holders molded into the left side fuel tank. Accommodates nearly any size cup or water bottle.

Mower Decks

Available sizes- 44" & 52"

Type	Free-floating mower using 3 blades with center blade to the front.
Deck Lift	Raise and lower deck from operators seat with simple foot-operated deck height adjustment. One pin sets cutting height from 1"-4.5" in .25" increments.
Construction	.125" welded steel. Solid 1.000" x .375" steel bars reinforce impact areas on trim edges. Box-section construction used for front edge of deck to eliminate bending of deck leading edge. Deck housing is 4" deep to provide room for high capacity mowing. Reinforcements welded onto deck spindle mount areas.
Mowing blades	2.50" width x .200" thick
Blade tip speed	44" deck- 17,800 fpm 52" deck- 18,300 fpm
Blade drive	V-belt to all three spindles. Spring tension idler pulleys.
Spindles	Machine aluminum housing. 1.000" diameter high carbon steel shafts and sealed ball bearings.
Flotation	Suspended mower floats on four spring-assisted chains. 4 anti-scalp wheels across front of deck.
Width of cut	44" 52"
Trim capacity (left side)	44" model- 0.5" 52" model- 6.0"
Accessories	BAC-VAC Catcher. Rear mounted, 9-bushel hopper is dumped from the seat without leaving the machine. Blower is powered from right-side deck spindle. Hopper and blower can be removed in seconds. Mulch Kit. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the deck. Reduces handling of clippings, improves appearance and recycles nutrients back to the soil. Hitch kit. Optional bolt-on hitch with 7/8" hole. Will accept any standard ball.

Johnson City Kubota & Equipment, LLC